Vertical Datums and Leveling

Product Details

Dr. James P. Reilly

A datum is a reference system for computing or correlating the results of surveys. The two principal types of datums are vertical and horizontal. A vertical datum is a level surface to which heights are referred. In a widespread network of vertical control, geodetic leveling is the technique that provides the most reliable elevation differences between control points. It is a form of precise leveling in which the observing team limits the magnitude of error by using calibrated instruments in combination with a rigorous, symmetrical observing procedure.

You will learn why General Procedures must be followed, gain an understanding of the Sources of Errors and how they occur, learn the Equipment used and how to keep it in good working condition, understand why the Collimation Check is critical, how to use the Compensation Check, and understand the Observing Routine that is used when leveling a line of the National Geodetic Vertical Control Network.

Course # V01C - 6 hours
FL 039-18; KY 2000 - 160cc

View additional details

Additional Details

State Board Recognition of Auburn University CEUs

Some states require that course sponsors/providers get approval, some require individual course approval, and almost all recognize ABET-accredited institutions and CEUs. Most states accept correspondence courses and allow CEUs to be converted to PDHs (or other measure of contact hours). A few states place the responsibility for individual course approval solely on the licensee. And because Continuing Education for PEs and LSs is relatively new and expanding, the states that require CE and their requirements change fairly frequently. If you are licensed in multiple states, you understand the situation. Since we deliver courses nationwide, it is impossible to detail every state's requirements in this catalog and how our courses may meet them. At catalog printing, we feel Auburn University and/or its courses meet CE requirements in almost all the states that require continuing education.

You should contact your state's licensing board about their rules if you are not familiar with them, and for specific course appropriateness for your license and situation. (Before you contact your state board, please read the next section and have this catalog handy.) We work hard to comply with each state's rules, but in every state the responsibility for meeting continuing education requirements rests with you, the licensee.